1.  This update v4.74 applies to DRB-25 Transceivers only.  
 
    Previously released versions of the Controller (v3.10) 
    and IP Controller (v4.3) remain current and do not need 
    to be updated.

    IP Controller (v4.3) supports the IP_Link feature to 
    connect two DRB-25s back-back over IP.  

2.  Transceiver v4.74 requires that Programmer v2.7 be used.  

    http://www.westelwireless.com/downloads/DRB-25_2_7_Setup.exe

3.  Update Details

3.1 The update enhances the operation in link radio mode.  

3.2 The update allows for a transceiver to be remotely reset by 
    exceeding the programmed PTT Timeout.  If the PTT timeout is 
    programmed for (say) 90s then if an attempt is made to 
    transmit for longer than this the transceiver will reset itself.  
 
    The reset takes approximately 15 - 20s.

4.  For any questions on this release please contact Westel 
    Wireless at wws_info@westelwireless.com


